 |
|
* Gas Powered, operates on fuel rod and cordless battery offering complete portability through elimination of air hose and compressor * Well balanced and lightweight reduces user fatigue * Adjustabl ...
|
|
On sale for $404.70 |
 |
|
| |
|
| |
 |
|
* Lightweight magnesium housing for job site durability * 500 inch per pound of driving energy for the hardest of applications * Tool free adjustable depth control for quick counter sink adjustment * ...
|
|
On sale for $369.01 |
|
|
| |
|
| |
 |
|
* 7.6 lb magnesium housing and magazine aid to provide one of the lightest mailers in the industry * 12-3/4” height allows for toe-nailing in confined areas * Unique engine design generates power to b ...
|
|
On sale for $362.52 |
|
|
| |
|
| |
 |
|
* Tool converts to metal connector nailer in seconds with included tip * Lightweight magnesium housing * Tool free adjustable exhaust * Patented push button depth of drive * Aggressive teeth for toe n ...
|
|
On sale for $358.07 |
|
|
| |
|
| |
 |
|
* Lightweight and well balanced for easy maneuverability * Exhaust muffler reduces noise pollution * High capacity magazine holds 150 staples allowing for fewer replenishments * Open magazine desig ...
|
|
On sale for $356.76 |
|
|
| |
|
| |
 |
|
* Utility coil nailer with Contact trip * Drives 4d to 12d nails (1-1/2” to 3-1/4”) * Use for framing, decking, sheathing, and siding ...
|
|
On sale for $346.92 |
|
|
| |
|
| |
 |
|
* Uses 15º, 7/8” to 1-3/4” wire collated roofing nails * Steel skid plates with dual rubber inserts protect and stop sliding * Tool-free adjustable exhaust * Adjustable shingle guide * Fastens a full ...
|
|
On sale for $321.46 |
|
|
| |
|
| |
 |
|
* Lightweight tool provides enhanced maneuverability and aids in minimizing user fatigue * Cycle rate of 20 fasteners per second at 100 PSI provides a speed rating that works as fast as you do * Low a ...
|
|
On sale for $306.90 |
|
|
| |
|
| |
 |
|
* Uses standard 22' plastic collated full round-head stick nails from .113” x 2” to .131” x 3-1/2” * Rugged aluminum magazine holds two nail strips at a time * Depth-of-drive adjustment exhaust port * ...
|
|
On sale for $295.16 |
|
|
| |
|
| |
 |
|
* Uses 15 gauge angle finish nails from 1” to 2-1/2” * Compact gun-body design for better hand holding position and fashion style * Minimized weight by adopting Teflon cylinder and magazine * Magazine ...
|
|
On sale for $234.56 |
|
|
| |
|
| |
 |
|
* Tool-free indexed depth setting is lockable and repeatable * Rear load magazine is fast and easy to load and unload with an industry leading 160 nail capacity * Dual-load magazine can be loaded by e ...
|
|
On sale for $218.38 |
|
|
| |
|
| |
 |
|
* Uses standard 16 gauge finish nails from 3/4” to 2-1/2” long (will accommodate 3/4” to 1-1/4” with supplied magazine insert) * Special hardened driver blade * Depth-of-drive adjustment to match appl ...
|
|
On sale for $216.44 |
|
|
| |
|
| |
 |
|
* Oil-free engine requires no lubrication, leaves no oil stains on work * Tool-free removable magazine for fast cleaning and jam clearing * Adjustable depth control for quick countersinking adjustmen ...
|
|
On sale for $211.81 |
|
|
| |
|
| |
 |
|
* Oil-free engine requires no lubrication, leaves no oil stains on work * Magnesium housing for job site durability and light weight * Adjustable depth of drive for quick countersinking adjustments * ...
|
|
On sale for $196.02 |
|
|
| |
|
| |
 |
|
* Shoots 4 different size 18 gauge brads * Solid state reliability * Hardened high carbon steel working parts * Trigger and surface contact safety locks * Non-marring tip * 10' (3.5M) power cord * Du ...
|
|
On sale for $155.03 |
|
|
| |
|
| |
 |
|
* Uses standard 18 gauge, 1/4” crown staples from 1/2” to 1” long * Special hardened driver blade with quick-release nosepiece * Sequential fire trigger * Strong and light weight die-cast aluminum bod ...
|
|
On sale for $112.65 |
|
|
| |
|
| |
 |
|
* .120 Galvanized & Coated Plain Shank Coil Nail * For use in N80CB, N86C and N100C * 3-1/4”, 12D * 2.7M per box ...
|
|
On sale for $111.07 |
|
|
| |
|
| |
 |
|
* Uses standard 18 gauge brads from 5/8” to 1-1/4” long (Do not stock) * Special hardened driver blade * Quick-release nosepiece for fast clearing of jams * Sequential fire trigger * Strong and light ...
|
|
On sale for $103.26 |
|
|
| |
|
| |
 |
|
* For use in pneumatic nailers N80C (2750-5429), N86C and N100C * Blunt chisel point * Galv-A-Tech III® finish * 2-1/2” length * 0.97” shank * 12 coils of nails * 3,600 per box ...
|
|
On sale for $102.32 |
|
|
| |
|
| |
 |
|
| |
|
| |
 |
|
* Use in N65CP-1 * C8R90BD: 2-1/2”, 8D, ring shank * C8R90BDG: 2-1/2”, 8D, ring shank, galvanized ...
|
|
On sale for $88.09 |
|
|
| |
|
| |
 |
|
| |
|
| |
 |
|
* Use in N65CP-1 * 3.6M per box * C8P90BDG: 2-1/2”, 8D, plain shank, galvanized ...
|
|
On sale for $78.05 |
|
|
| |
|
| |
 |
|
* 14 amps delivers power when you need it * No air compressor needed * Non-slip cushioned grip * Solid state circuitry * Ergonomic design, high impact plastic * Two safety locks-Trigger and Surface * ...
|
|
On sale for $72.02 |
|
|
| |
|
| |
 |
|
* Standard Galvanized * For use in RN45B, N12-B and N12-1 * 1-3/4”, 5D * 7.2M per box ...
|
|
On sale for $71.14 |
|
|
| |
|
| |
 |
|
* Use in N55C and N55CD, N50C and N65CP-1 * Galvanized * Ring Shank * 2-3/16” * 3.6M per box ...
|
|
On sale for $68.03 |
|
|
| |
|
| |
 |
|
* Use in N80CB abd N86C and N100C * Plain shank * Coated coil nails * 2.7M per box * C8P120D: 2-1/2”, .120 plain shank, 8D * C10P131D: 3”, .131 plain shank, 10D * C12P120D: 3-1/4”, .120 plain shank, 1 ...
|
|
On sale for $60.70 |
|
|
| |
|
| |
 |
|
* Use in N55C and N55CD, N50C and N65CP-1 * 2-3/16”, 7D * 3.6M per box ...
|
|
On sale for $60.41 |
|
|
| |
|
| |
 |
|
* Round head plastic collated stick nail * Plain shank * Quantity: 5,000 per box unless otherwise noted * RH-S8D113EP: 2-3/8”, 8D * RH-S8D113GEP: 2-3/8”, 8D, galvanized * RH-S10D131EP: 3”, 10D, 4000 p ...
|
|
On sale for $57.11 |
|
|
| |
|
| |
 |
|
* Plain Shank Coated * For use in N16, N80SB, N86S, N70S, N70SB and N100S * 2”, 6D * 2000 per box ...
|
|
On sale for $39.93 |
|
|
| |
|
| |
 |
|
* 15 Gauge * For use in N60FN (2750-5395) * FN1520: 1-1/4” * FN1528: 1-3/4” * FN1524: 1-1/2” * FN1532: 2” * FN1536: 2-1/4” * FN1540: 2-1/2” ...
|
|
On sale for $31.70 |
|
|
| |
|
| |
 |
|
* Carded * Used in air line hose connection * 3/8” MPT * Heavy duty ...
|
|
On sale for $17.40 |
|
|
| |
|
| |
 |
|
| |
|
| |
 |
|
* For Arrow Electric Brad Nail Gun ET125 (2750-0834) * 1-1/4” brad nails * 18 gauge * 2000 per box ...
|
|
On sale for $8.85 |
|
|
| |
|
| |
 |
|
* Utilizes the tubular valve * Made of steel * Protective collar guards against accidental disconnect * 1/4” female NPT coupler * Carded ...
|
|
On sale for $6.30 |
|
|
| |
|
| |
 |
|
* Utilizes the tubular valve * Made of steel * Protective collar guards against accidental disconnect * 1/4” male NPT coupler * Carded ...
|
|
On sale for $6.22 |
|
|
| |
|
| |
 |
|
* Sleeve type coupler * Helps prevent accidental disconnection * 1/4” female NPT * Carded ...
|
|
On sale for $5.95 |
|
|
| |
|
| |
 |
|
| |
|
| |
 |
|
* Narrow crown staples * 18 gauge * 1/4” width * 1,000 per box * NS18088-1: 7/8” length * NS18100-1: 1” length ...
|
|
On sale for $4.01 |
|
|
| |
|
| |
 |
|
* Easily recognized design * Long 3/4” pilot * 1/4” Female NPT * Carded ...
|
|
On sale for $3.08 |
|
|
| |
|
| |
 |
|
* Industrial standard * Identified by the 3/16” pilot and flat bottom ”V” shaped ball groove * Mates with either sleeve type or push type couplers * 1/4” Female NPT * Carded ...
|
|
On sale for $2.45 |
|
|
| |
|
| |
 |
|
* Recognized by the extremely short pilot * Widest metal section between the ball groove and the pilot * Sealing surface is wider than other interchanges * Better sealing and longer seal life * 1/4” F ...
|
|
On sale for $2.44 |
|
|
| |
|
| |
